TINA/Spice/ADS124S06: mechanical model for 3D CAD Solidworks needed.

Dimitrius

Part Number: ADS124S06
Other Parts Discussed in Thread: TINA-TI, , ADS1248, ADS1148

Tool/software: TINA-TI or Spice Models

Hello, All,

My customer claims that used at ADS124S06 package is not standard TQFP-32 package and my customer cannot use existing at SolidWorks package model. Please upload/ send me to corporate email package model for SolidWorks.

Best regards,

Dmitry Tcholovsky

over 7 years ago

0 Oliver Landine - WEBENCH® Design Center over 7 years ago

TI__Expert 3055 points

I have sent Dmitry an email on this subject, which included a link to the desired STEP model. I think this answers the question. Dmitry, please confirm.

0 Afshin Matin over 7 years ago in reply to Oliver Landine - WEBENCH® Design Center

Prodigy 30 points

Hi Oliver,

I need the same step model for ADS1148/ADS1248.
It would be great if you could share the file here for everyone to use?

Cheers

0 Oliver Landine - WEBENCH® Design Center over 7 years ago in reply to Afshin Matin

TI__Expert 3055 points

Hi Afshin,

Those parts use a different TSSOP package, but the STEP model is posted in their product folders at and .

I think that addresses your request. Please confirm.

Regards,

Oliver

0 Afshin Matin over 7 years ago in reply to Oliver Landine - WEBENCH® Design Center

Prodigy 30 points

Hi Oliver,

Thanks for your reply. Please have a look in the product page for ADS1148. Yes, TSSOP model is there but the VQFN model is missing.

Cheers

0 Oliver Landine - WEBENCH® Design Center over 7 years ago in reply to Afshin Matin

TI__Expert 3055 points

Hi Afshin,

I noticed that yesterday, but I thought you were looking for the TSSOP package. I did request the creation of the VQFN model, and it was completed yesterday. I also requested a change in some back-end data so the newly created STEP model will be served. It can take a while to propagate through all the systems, but I expect it to be there by Monday. If you need it now, use https://webench.ti.com/cad/dlbxl.cgi/newstep/RHB0032H.stp.

Regards,

Oliver

0 Afshin Matin over 7 years ago in reply to Oliver Landine - WEBENCH® Design Center

Prodigy 30 points

Hi Oliver,

Thank you very much :)

Simulation, hardware & system design tools

Simulation, hardware & system design tools forum

TINA/Spice/ADS124S06: mechanical model for 3D CAD Solidworks needed.