• State
  • Locked Locked
  • Replies 4 replies
  • Subscribers 39 subscribers
  • Views 1116 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

CCS/TIDA-00555: Source code

Adi Selimovic
Intellectual 560 points

Part Number: TIDA-00555
Other Parts Discussed in Thread: ADS131E08

Tool/software: Code Composer Studio

Is there available a source code for TIDA-00555 (Isolated Current and Voltage Measurement Using Fully Differential Isolation Amplifier)?

Best regards,
Adi

  • 0
    TI__Expert 5130 points
    Adi, good morning and thank you for your interest in Texas Instruments and TI Designs. Your question has been received and has been forwarded to the design owners in our Industrial Grid Infrastructure team. You should be hearing back from them within the next 1-2 business days. Please be advised that due to the proximity of your request to the Christmas holiday, our responses may be a little more delayed than usual.

    Best Regards,
    John Fullilove
    Texas Instruments
    TI Designs
  • 0 in reply to JohnFullilove
    Intellectual 560 points
    Hi John,

    Unfortunately, no one has responded so far.

    Best regards,
    Adi
  • 0 in reply to Adi Selimovic
    TI__Expert 5130 points
    Adi, our apologies here. I have contacted the team again and will be sure to follow up with them until they get a response to you. Again, my apologies.
  • 0 in reply to JohnFullilove
    TI__Guru**** 206920 points

    Hello Adi,

    TIDA-00555 TI design with isolation amplifiers was tested using different approaches and the main approach was using ADS131E08 EVM.

    The EVM comes with a GUI and we used the GUI to measure the output of the isolation amplifier.

    We have reused the EVM GUI and do not have source code specific to TIDA-00555 since this is a generic evaluation system.

    If you could provide more details on the application including End equipment details and other related information, that would help me in guiding to any of the other TI designs that could have the required information.

    Thanks

    Sreenivasa