TINA/Spice/SN74LV4T125: SN74LV4T125

kamala kannan

Prodigy 20 points

Part Number: SN74LV4T125
Other Parts Discussed in Thread: TINA-TI, , UA78M

Tool/software: TINA-TI or Spice Models

I need Spice module for SN74LV4T125, i dont find it in website

over 6 years ago

0 Imran Dharwad over 6 years ago

TI__Intellectual 1440 points

Hi Kamala,

We do not have a spice model for this device. All our available models can be found using the link below. If you need a model developed, please get in touch with your local FAE.

0 Mostafa Shoukry over 6 years ago in reply to Imran Dharwad

Prodigy 30 points

What about a CAD model for this device to use with OrCad capture?

0 Oliver Landine - WEBENCH® Design Center over 6 years ago in reply to Mostafa Shoukry

TI__Expert 3055 points

Hi Mostafa,

Have you looked in

It has a bxl file for the part in the PW package. You can use the free Ultra Librarian reader to translate it to OrCAD. Are you using the TSSOP or the QFN package?

Regards,

Oliver

0 Mostafa Shoukry over 6 years ago in reply to Oliver Landine - WEBENCH® Design Center

Prodigy 30 points

OK got it. What about parts with no .bxl file like UA78M33CDCYR or any UA78MXX? It only has .stp file

0 Oliver Landine - WEBENCH® Design Center over 6 years ago in reply to Mostafa Shoukry

TI__Expert 3055 points

Hi Mostafa,

We'll have to create those files. It could be as early as Friday, but might take until sometime next week.

Regards,

Oliver

0 Oliver Landine - WEBENCH® Design Center over 6 years ago in reply to Oliver Landine - WEBENCH® Design Center

TI__Expert 3055 points

Hi Mostafa,

The bxl files for UA78M are now showing in the product folder.

I believe this addresses your questions. If so, please confirm. If not, please point out what we haven't done.

Regards,

Oliver

0 Mostafa Shoukry over 6 years ago in reply to Oliver Landine - WEBENCH® Design Center

Prodigy 30 points

Thanks

Simulation, hardware & system design tools

Simulation, hardware & system design tools forum

TINA/Spice/SN74LV4T125: SN74LV4T125