Tool/software: TINA-TI or Spice Models
Support Path: /Tools & software/Learn more about TI tools and software by technology/Analog development tools, models and symbols/TINA-TI Schematic capture and SPICE simulation/
Hi All
I'd like to know how to make dead time using two pulse generators. I don't want to make simultaneously on time of these pulse generators. The example figure as below.
The image Cited from; https://e2e.ti.com/blogs_/b/powerhouse/archive/2015/09/10/control-a-gan-half-bridge-power-stage-with-a-single-pwm-signal
