Other Parts Discussed in Thread: TINA-TI
Tool/software: TINA-TI or Spice Models
Good day,
Is there a tool or command in Tina-TI to automatically measure and export values (voltage or current) at an exact time point or interval (max,min, avg, rms) in a stepping simulation ?
( something similar to .meas Ltspice utility)
What I am trying to do is set the input pulse and step its amplitude from 1mV-1,8V and then measure average voltage at the output ot the IC after pulse detection for each response . Then compare those values and continiue my project. It is necessary for me to analyze the error and check if it is suitable for this application.
Regards,
Martin
