TINA/Spice/TPS40055: Tina TI macro component error

James Crow

Part Number: TPS40055
Other Parts Discussed in Thread: TINA-TI,

Tool/software: TINA-TI or Spice Models

When running the ERC check I get the following error: "TLD pin: Gnd does not match any pin of the macro component. {TPS40055}

I've enclosed the schematic as well, Please advise.PCM50.TSC

over 7 years ago

0 Nikhil Gupta (Product Folder Models) over 7 years ago

TI__Mastermind 39210 points

HI James,

Your file seems to be corrupted. I took the file on the TPS40055 product folder, copied and pasted your design into it and it worked. It is attached for your reference.

You might want to check your design or settings though. I did not see the output ramp up.

slim075_NG.TSC

Simulation, hardware & system design tools

Simulation, hardware & system design tools forum

TINA/Spice/TPS40055: Tina TI macro component error