TINA/Spice/LM48556: Error when importing SPICE model of LM84556 into TINA

Ricardo Li

Intellectual 1045 points

Part Number: LM48556
Other Parts Discussed in Thread: TINA-TI

Tool/software: TINA-TI or Spice Models

Dears,

When I import SPICE model of LM84556 into TINA, I met an error.

It pops up warning that "Missing number at line : #35".

I download this SPICE model from our website.

www.ti.com/.../toolssoftware

Does this mean that TINA don't support the SPICE model of LM84556? Can I use this SPICE model get a TINA simulation model?

Thanks for your help in advance.

Regards,

Ricardo

over 7 years ago

0 JC Zhu over 7 years ago

TI__Mastermind 37690 points

Ricardo,

I'll send you an email to address this.

Thanks,
JC

0 Imran Dharwad over 7 years ago

TI__Intellectual 1440 points

Hi Ricardo,

Primary observation is the spice model file on web is encrypted and we cannot import it to TINA.
You would require unencrypted model to import into TINA-TI. I will be closing out this thread and mail you internally.

Also the error in TINA you observed is because the line(which is a comment) is not started with '*'.
This works in PSPICE and may not work in TINA.

Simulation, hardware & system design tools

Simulation, hardware & system design tools forum

TINA/Spice/LM48556: Error when importing SPICE model of LM84556 into TINA