TINA/Spice/DCR011203: DCR01 Spice Model

ANIL AYDIN

Part Number: DCR011203
Other Parts Discussed in Thread: TINA-TI

Tool/software: TINA-TI or Spice Models

Hello,

I am looking for spice model of DCR01 Converter whic is not in the devive tools and softwares. How can I find its spice model to simulate the circuit in Altium designer?

over 7 years ago

0 Nikhil Gupta (Product Folder Models) over 7 years ago

TI__Mastermind 39210 points

Hi Anil,

We do not have a model for this device. All available spice models can be found using the link below. You can use the search box or column filters to narrow down your search to relevant devices

0 Hayden_Hast over 7 years ago in reply to Nikhil Gupta (Product Folder Models)

TI__Intellectual 1515 points

Hi Nikhil,

I am also looking for a SPICE model (well any model really) for TI's DCR01xxxx Isolated Power modules. I assume there are no plans to create a SPICE model, but can we expect a WEBENCH model anytime soon?

If not, how would you suggest we evaluate this device?

Regards,
Hayden

0 Nikhil Gupta (Product Folder Models) over 7 years ago in reply to Hayden_Hast

TI__Mastermind 39210 points

Hi Hayden,

You are right that there is not plan to add a spice model or WEBENCH for these devices at this time. If you are looking to evaluate these devices, it would be best to post any questions on this forum: e2e.ti.com/.../ The folks monitoring that forum will be in the position to answer your questions and/or evaluate if the model/WEBENCH tools should be enabled for the devices.

0 Hayden_Hast over 7 years ago in reply to Nikhil Gupta (Product Folder Models)

TI__Intellectual 1515 points

Hi Nikhil,

Thanks for the answer here. I'll follow up on the modules forum.

Regards,
Hayden

Simulation, hardware & system design tools

Simulation, hardware & system design tools forum

TINA/Spice/DCR011203: DCR01 Spice Model