• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 38 subscribers
  • Views 1200 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TINA/Spice/OPA191: SPICE model for Multisim

Mohamad FallahRad
Prodigy 20 points
Part Number: OPA191
Other Parts Discussed in Thread: TINA-TI,

Tool/software: TINA-TI or Spice Models

I have difficulty with simulating OPA191 in Multisim. I copied the PSPICE model from TI website directly in Multisim.

Will appreciate any help.

  • 0
    TI__Mastermind 39210 points
    Hi Mohamad,

    Multisim is not officially supported by us. I would recommend trying this out in TINA-TI which is a free simulator that we provide. If you face any issues with TINA-TI we will be happy to help you out. There is a short video training series below that will help you get started with TINA-TI.

    If you need to use Multisim only for some reason, I would recommend reaching out to National Instruments through their support channel. I believe they can convert unencrypted models on our website to be Multisim compatible.