TINA/Spice/PMP15027: Looking for unencrypted model.

hemalatha mekala

Part Number: PMP15027
Other Parts Discussed in Thread: TINA-TI, TPS92691

Tool/software: TINA-TI or Spice Models

: I use Saber tool from Synopsys. I would like to simulate this model in Saber.
Kindly provide unencrypted model for TPS92961-Q1.TPS92691-Q1_TRANS.lib

over 8 years ago

0 Nikhil Gupta (Product Folder Models) over 8 years ago

TI__Mastermind 39210 points

Hi Hemalatha,

We are unable to provide the unencrypted model on the web publicly for this device. Can I know why you need to simulate this in Saber? Are you able to simulate this in TINA-TI instead (free simulator from TI).

0 hemalatha mekala over 8 years ago in reply to Nikhil Gupta (Product Folder Models)

Prodigy 30 points

Hi Nikhil,

I am an Applications Engineer for Saber tool. I wanted to do a design example in Saber using LED driver.

But I see that all your LED driver pspice models are encrypted. But if needed I can translate and then again encrypt the model from my tool before publishing.

Thanks & Regards,

Hemalatha

0 Nikhil Gupta (Product Folder Models) over 8 years ago in reply to hemalatha mekala

TI__Mastermind 39210 points

Hi Hemalatha,

We can not provide the unencrypted model on this forum, but I would request you to get in touch with Mike Lux, Jim Patton or David Norris from Synopsys so we can continue this discussion offline. We have worked with him in the past on few such requests.

0 hemalatha mekala over 8 years ago in reply to Nikhil Gupta (Product Folder Models)

Prodigy 30 points

Hi Nikhil,

Thanks for the reply. Talking to my Manager Jim Patton. Will get back to you if I need further help.

Simulation, hardware & system design tools

Simulation, hardware & system design tools forum

TINA/Spice/PMP15027: Looking for unencrypted model.