TINA/Spice/LM5030: I need a TINA model

Stephen Oberholzer

Intellectual 895 points

Part Number: LM5030
Other Parts Discussed in Thread: TINA-TI,

Tool/software: TINA-TI or Spice Models

Can someone at TI please create a TINA model for the LM5030 ?

This is such a versatile controller and deserves a TINA model, please.

I tried to import the PSpice netlist of the PSPICE model available on your web site.

Unfortunately it is not compatible with TINA.

Thank you very much.

over 7 years ago

0 Nikhil Gupta (Product Folder Models) over 7 years ago

TI__Mastermind 39210 points

Hi Stephan,

What was the issue that you faced when importing this into TINA-TI? Can you provide more details about the error message?

0 Nikhil Gupta (Product Folder Models) over 7 years ago in reply to Nikhil Gupta (Product Folder Models)

TI__Mastermind 39210 points

Hi Stephan,

We have not heard back from you on this topic. I hope your issue was resolved. I will close this post, but feel free to respond back with the details if you need further assistance.

Simulation, hardware & system design tools

Simulation, hardware & system design tools forum

TINA/Spice/LM5030: I need a TINA model