• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 39 subscribers
  • Views 403 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TPS54620

ranga reddy
Prodigy 60 points

Hi

in the online Switcher pro design there is no option like change the Inductor values , capacitors values and check the response of the device

Please let me know how we can do that.

Thanks in advance

rangareddy 

  • 0
    TI__Expert 3875 points

    Hi Ranga,

    If you click (left mouse button) on the inductor in the schematic that SwitcherPro generated, you will get the "Inductor Properties" dialog shown below:



    This dialog allows you to select a different inductor from our library of ~9k inductors. You can also add your own inductor using the "Library Manager" in the bottom left corner of the window.

    Likewise, you can click on the output capacitor to change its value.

    Hope this helps,
    Michael

    Michael Krasnicki
    Analog eLab
    Texas Instruments