Tool/software: TINA-TI or Spice Models
Hi all,
I've currently imported the BQ25570 PSpice Model into ADS version 2015.01 using Netlist import translator. Below are the results I got, the schematic and the symbol. I'm wondering how to connect these components for verifying the BQ25570 operation. Could you please show me how to do this? Thank you for your support.
Hi Minh,
The model on the web is encrypted and can not be imported into other tools. You will need the unencrypted version of the model. Please refer to the following FAQ:
Usually we build generic syntax models so the unencrypted version can be imported into other tools. However, in this case, since the run time was long, we had to build it using customer blocks in PSpice and TINA-TI and hence they can only be used in those simulators. You can try out TINA-TI. It is free of cost.
Hi Nikhil,
Thank you very much for your instruction. Unfortunately I could not find the unencrypted version of BQ25570 model because the link of "How to find out whether a model is encrypted or unencrypted" is not working with me. Please see the screenshot below. I'll try to import the model into TINA-TI.
