TINA/Spice/LM5170-Q1: TINA Error

lee 84680

Part Number: LM5170-Q1
Other Parts Discussed in Thread: TINA-TI, LM5170

Tool/software: TINA-TI or Spice Models

Hi, When I run TINA reference design circuit of LM5170, error message comes out like " Missing syntax element. Line: #1622.{SCK#}.

How do I fix this error message? Thanks.

over 6 years ago

0 ranjanir over 6 years ago

TI__Intellectual 1760 points

Hi Lee

Which version of TINA-TI are you using? I was able to run with no errors but only warnings of nets not connected in my simulation of the transient reference design. My TINA version is 9.3.150.328 SF-TI.

Regards

Ranjani

0 lee 84680 over 6 years ago in reply to ranjanir

Intellectual 320 points

I am using 9.3.50.40SF-TI, so I tried to update, but an error message comes out like "Cannot connect to the internet or cannot find version file!". Internet connection is OK. Thanks.

0 ranjanir over 6 years ago in reply to lee 84680

TI__Intellectual 1760 points

You could try removing the version you have currently and reinstalling from the link: http://www.ti.com/tool/TINA-TI
if it still doesn't work, you can attach your .tsc file and send it to us for review.
Regards
Ranjani

Simulation, hardware & system design tools

Simulation, hardware & system design tools forum

TINA/Spice/LM5170-Q1: TINA Error