TINA/Spice: How do I run a simulation in TINA-TI?

Anthony Osibajo

Prodigy 40 points

Other Parts Discussed in Thread: TINA-TI, SM72442, MSP430F5132

Tool/software: TINA-TI or Spice Models

Please how can I locate the following components MSP430F5132 and SM72442.

I can't see any microcontroller and DC-DC converter.

Kindly help am using TINA-TI

over 6 years ago

0 John Miller - Sensing over 6 years ago

TI__Mastermind 40295 points

Anthony,
Is your goal to simulate the operation of the MSP430 and the SM7442 in TINA-TI?
Regards,
John

0 Nikhil Gupta (Product Folder Models) over 6 years ago

TI__Mastermind 39210 points

Hi Anthony,

TINA-TI is an analog simulator, hence you will not find the MSP models in there. YOu can post your MSP related questions to this forum: e2e.ti.com/.../

Also, unfortunately, we don't have a model available for the SM72442 either. For this, you can post any questions to this forum: e2e.ti.com/.../196

Also as an FYI, all available models can be found using the link below.

0 Anthony Osibajo over 6 years ago in reply to John Miller - Sensing

Prodigy 40 points

Yes John.

Or a platform I can draw circuit and simulate the complete circuit diagram.

0 John Miller - Sensing over 6 years ago in reply to Anthony Osibajo

TI__Mastermind 40295 points

Thanks Anthony.
Please see my colleague Nikhil's reply for more info.
John

Simulation, hardware & system design tools

Simulation, hardware & system design tools forum

TINA/Spice: How do I run a simulation in TINA-TI?