TINA/Spice/LMG3410R070: error code VLDO

Adrian Ymeraj

Part Number: LMG3410R070
Other Parts Discussed in Thread: TINA-TI

Tool/software: TINA-TI or Spice Models

Hello team,

my customer started using TINA for the first time in order to simulate the LMG3410 and he downloaded the spice model from the website (snom608a). After the simulation of the transient the pogram gives him an error of which you can see the screenshot.

Is there anything we can suggest to make the error disappear?

Thank you and best regards,

Adrian

over 7 years ago

0 Herman Theodorus over 7 years ago

TI__Genius 9775 points

Hi Adrian,

We'll have the engineer that worked on this model to look into this.

Herman

0 Adrian Ymeraj over 7 years ago in reply to Herman Theodorus

TI__Expert 3810 points

Hello guys,

do you have any update on this?

Thanks and best regards,
Adrian

0 Arash Loloee over 7 years ago in reply to Adrian Ymeraj

TI__Mastermind 31271 points

Adrian,

This is not a simulation error. In fact you notice the simulation runs fully and it is plotted. If you even change the simulation time, still it will finish it successfully.
After encryption it could not find the internal LDO signal to plot, so simply copy the schematic in to a new schematic and it will not try to plot the mentioned internal signal anymore and you will not see that warning anymore.

Regards,
Arash

Simulation, hardware & system design tools

Simulation, hardware & system design tools forum

TINA/Spice/LMG3410R070: error code VLDO