WEBENCH® Tools/WEBENCH-POWER-DESIGNER: architecture design

eli

Guru 13485 points

Part Number: WEBENCH-POWER-DESIGNER
Other Parts Discussed in Thread: TPS54395

Tool/software: WEBENCH® Design Tools

With the new Webanch,How I can create a new design for multiple output?

over 6 years ago

0 eli over 6 years ago

Guru 13485 points

I meant, HOW I can create a new design for multiple output?

0 Gerold Dhanabalan - Online Design Tools over 6 years ago in reply to eli

TI__Genius 14455 points

Hi Eli,

We currently support only single output designs in the new WEBENCH tool in HTML.

Regards,

Gerold

0 eli over 6 years ago in reply to Gerold Dhanabalan - Online Design Tools

Guru 13485 points

1.Also no possible to simulate/design for TPS54395,which is dual ootput?

2.No option to open design from device product folder?

0 Gerold Dhanabalan - Online Design Tools over 6 years ago in reply to eli

TI__Genius 14455 points

Hi Eli,
For TPS54395, you can open the design from the product folder. But it will take you to the Power Architect tool in Flash. The new WEBENCH Power Designer tool does not support multiple outputs. Please let me know if you have more questions.

regards,
Gerold

Simulation, hardware & system design tools

Simulation, hardware & system design tools forum

WEBENCH® Tools/WEBENCH-POWER-DESIGNER: architecture design