WEBENCH® Tools/TPS54240: TPS54240 - WEBENCH vs TINA-TI simulation results mismatch

Michele Marino24

Part Number: TPS54240
Other Parts Discussed in Thread: TINA-TI

Tool/software: WEBENCH® Design Tools

Hi,

I'm simulating the loop stability in WEBENCH for the TPS54240 DC converter. I have exported the design for TINA-TI, but the same simulation gives different bode diagram.

Do you have any idea about?

Thank you.

Regards,

Michele

over 6 years ago

0 Praveen Badiger over 6 years ago

TI__Expert 8365 points

Hi Michele,

The WEBENCH only support the TINA export of startup test bench. The exported startup test bench is transient model which can't be used for AC analysis.

Thanks & Regards,
Praveen B

0 Michele Marino24 over 6 years ago in reply to Praveen Badiger

Prodigy 100 points

Hi Praveen,
ok it's clear.
Thank you.
Regards,
Michele

Simulation, hardware & system design tools

Simulation, hardware & system design tools forum

WEBENCH® Tools/TPS54240: TPS54240 - WEBENCH vs TINA-TI simulation results mismatch