WEBENCH® Tools/LM3409: Unable to recreate a previous simulation

Vahe Agababian

Part Number: LM3409

Tool/software: WEBENCH® Design Tools

Hi,

I previously simulated a design using the LM3409 (ID 36 on my account), but if I now try to recreate the same simulation using the same parameters, WEBENCH throws an error saying 'The design cannot be created with this device'. I can still open the design in my history, so it clearly can be created. I am actually trying to modify my design (lower the operating current to 1A), but WEBENCH cannot create that design from new either. Do you have any ideas what the problem might be?

Kind regards,

Vahe

over 7 years ago

0 Praveen Badiger over 7 years ago

TI__Expert 8365 points

Hi Vahe,

Could you please share the older design link using 'Share Design' option on WEBNEHCH.

Thanks & Regards,
Praveen B

0 Vahe Agababian over 7 years ago in reply to Praveen Badiger

Prodigy 40 points

Hi Praveen,
Thank you for your quick response. Here's a link to the design:
webench.ti.com/.../SDP.cgi
Kind regards,
Vahe

0 Praveen Badiger over 7 years ago in reply to Vahe Agababian

TI__Expert 8365 points

Hi Vahe,

Thank for sharing the design.We are looking into it.

Thanks & Regards,
Praveen B

0 Praveen Badiger over 7 years ago in reply to Praveen Badiger

TI__Expert 8365 points

Hi Vahe,

We have fixed this issue. The fix will be available on ti.com by end of next the week.

Thansk & Regards,
Praveen B

0 Amod Vaze over 7 years ago in reply to Vahe Agababian

TI__Mastermind 28790 points

Hi Vahe,

Thanks for your patience. We have fixed this issue now. For your convenience, please find the 1A design for your earlier specification: webench.ti.com/.../SDP.cgi Please let us know if you have any more questions.

Regards,
Amod

Simulation, hardware & system design tools

Simulation, hardware & system design tools forum

WEBENCH® Tools/LM3409: Unable to recreate a previous simulation