WEBENCH® Tools/TPSM84624: Bode plot simulation not present in Webench

Sebastian Ciesluk80

Part Number: TPSM84624

Tool/software: WEBENCH® Design Tools

Hi,

Trying to simulate TPSN84624 I can see in Webench startup, Load Transient, Input transient and steady state simulation options but bode plot is not present. Are you able to share a design with me where this sim is available?

over 6 years ago

0 Gerold Dhanabalan - Online Design Tools over 6 years ago

TI__Genius 14455 points

Hi Sebastian,

We currently do not have the bode plot simulation enabled for this device. We will be enabling this soon.

Regards,

Gerold

0 Sebastian Ciesluk80 over 6 years ago in reply to Gerold Dhanabalan - Online Design Tools

Expert 1121 points

Thanks for answer,

Are you able to specify when the plot will be enabled?

Sebastian

0 Gerold Dhanabalan - Online Design Tools over 6 years ago in reply to Sebastian Ciesluk80

TI__Genius 14455 points

Hi Sebastian,

You can expect the bode plot simulation to be enabled by the end of April.

Regards,

Gerold

0 Sebastian Ciesluk80 over 6 years ago in reply to Gerold Dhanabalan - Online Design Tools

Expert 1121 points

Thank you for this , it is very helpful.

Sebastian

Simulation, hardware & system design tools

Simulation, hardware & system design tools forum

WEBENCH® Tools/TPSM84624: Bode plot simulation not present in Webench