PMP5651: Required Design Files

Naresh K

Part Number: PMP5651
Other Parts Discussed in Thread: TPS40210

Hi,

I am looking for Flyback DC-DC converter with 50V@1.4A Output.

This PMP5651 design is suitable for my requirement. Someone please provide me the design files of this reference design.

regards

Naresh

over 7 years ago

0 EricLee over 7 years ago

TI__Guru 68581 points

Hi
The responsible engineer is out of office now. He will reply by 4/23
Regards,
EL

0 Naresh K over 7 years ago in reply to EricLee

Intellectual 510 points

Hi Eric Lee

Please help us to get the design files

regards

Naresh

0 Naresh K over 7 years ago in reply to Naresh K

Intellectual 510 points

Hi Eric Lee,

I am waiting for your response. Please help us

regards

Naresh

0 Youhao Xi over 7 years ago in reply to Naresh K

TI__Guru* 79815 points

Hi Naresh,

Thank you for considering the TPS40210. The PMP5651 was created by TI's reference design group, and we are trying to get the design files. Please allow us some time.

Thanks,
Youhao Xi, Applications Engineering

0 Youhao Xi over 7 years ago in reply to Youhao Xi

TI__Guru* 79815 points

Hi Naresh,

Here you go.

https://e2e.ti.com/cfs-file/__key/communityserver-discussions-components-files/234/PMP5651_2D00_REV_5F00_C.7z

Thanks,

Youhao

0 Naresh K over 7 years ago in reply to Youhao Xi

Intellectual 510 points

Thank you Youhao,

regards

Naresh

0 Naresh K over 7 years ago in reply to Youhao Xi

Intellectual 510 points

Hi Youhao,

I requested the design files of PMP5651 in which the output is 53V@1.35A.

But the attachment which you shared is PMP4963. In this the output is 29.4V@3A.

Can we modify this design to my required output(53V@1.35A)? If yes please advice me the changes required or else please share the design which matches to my requirement

Thanks & regards

Naresh

0 Youhao Xi over 7 years ago in reply to Naresh K

TI__Guru* 79815 points

Hi Naresh,

Both PMPs share the same PCB, just the BOM difference. Please copy the BOM of PMP5651. You can find at the following link, too:

www.ti.com/.../slur634

Thanks,
Youhao

0 Naresh K over 7 years ago in reply to Youhao Xi

Intellectual 510 points

Thank you Youhao,

Thanks & regards
Naresh

0 Naresh K over 7 years ago in reply to Youhao Xi

Intellectual 510 points

Hi Youhao,

I think the attached files were developed in PADs design tool. Could you please share me the Altium or Cadence design files?

Thanks & regards
Naresh

0 Youhao Xi over 7 years ago in reply to Naresh K

TI__Guru* 79815 points

Hi Naresh,

It is the only design file we have. Altium or Cadence files for this design are not available.

Thanks,
Youhao

Simulation, hardware & system design tools

Simulation, hardware & system design tools forum

PMP5651: Required Design Files