• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 37 subscribers
  • Views 331 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Original question:

WEBENCH® Tools/LM2596: WEBENCH® Tools__LM2596:

WEBENCH® Tools/TLV170: WEBENCH® Tools__

Vladimir Naumenkov
Expert 2970 points
Part Number: TLV170

Tool/software: WEBENCH® Design Tools

Dear Sir, good day

My question, generally speaking, does not apply to TLV170. I want to find out how I draw a single power supply and make a label in order to dissolve this supply wherever necessary. In order not to draw several identical power supplies.

Please, see attach.

TIA

Sincerely,

Vladimir Naumenkov

www.agat.by

TLV170_.TSC

  • 0
    TI__Genius 9775 points
    Hi Vladimir,

    If I understand your questions correctly, basically you can put jumper (Special tab -> Jumper). Let's say you have 5V DC Voltage Supply and the positive terminal you connect to J1, then you can connect this J1 into the opamp positive power supply terminal

    Hope this helps,
    Herman