TINA/Spice: snvm454

Keith Johnson3

Other Parts Discussed in Thread: TINA-TI

Tool/software: TINA-TI or Spice Models

I would like to simulate a flyback transformer with the following specification, does anyone have s similar Ti Tina model that I can modify?

Glued-2 Planar core.pdf

over 6 years ago

0 Herman Theodorus over 6 years ago

TI__Genius 9775 points

Hi Keith,

FYI, One of our team will take a look at this.

Herman

0 Keith Johnson3 over 6 years ago in reply to Herman Theodorus

Prodigy 110 points

Ok Thanks

0 Arpan Gupta over 6 years ago

TI__Expert 3140 points

Hi Keith,

Please search for the keyword Flyback using the link www.ti.com/spicerack. Here, you will get the list Flyback controller parts which have TINA-TI model. Kindly download the released test bench from one of the parts. Then configure your application schematic using the released test bench components.

For the transformer, please go through the below E2E post.

https://e2e.ti.com/support/tools/sim-hw-system-design/f/234/p/765959/2835275#2835275

Here you will get the subcircuit of transformer. Kindly import it in your TINA-TI test bench and change its parameters according to your design.

Thanks & Regards,

Arpan Gupta

Simulation, hardware & system design tools

Simulation, hardware & system design tools forum

TINA/Spice: snvm454