WEBENCH® Tools: webench allegro connector key problem

user5898146

Tool/software: WEBENCH® Design Tools

I entered the key as required by the web page&tried countless times，but it always display the key is invalied,help me thank u.

over 5 years ago

0 Umayal Ramanathan over 5 years ago

TI__Expert 5200 points

Hi User,

We have forwarded the query to concerned team. Waiting for the response from the concerned team.

We shall keep you updated on the same.

Meanwhile,could you please share the operating system as well as Allegro Version you are using?

Thanks and Regards,

Umayal

0 Umayal Ramanathan over 5 years ago in reply to Umayal Ramanathan

TI__Expert 5200 points

Hi User,

As requested in our previous post could you please share the operating system as well as Allegro Version you are using?

Thanks and Regards,

Umayal

0 Umayal Ramanathan over 5 years ago in reply to Umayal Ramanathan

TI__Expert 5200 points

Hi User,

Since we did not hear back from you, we assume you have been able to solve the issue.
Please add another post to this thread or (in case this thread is locked) start a new thread if the problem still exists.

Thanks and Regards,

Umayal

Because of the Thanksgiving holiday in the U.S., TI E2E™ design support forum responses may be delayed from November 25 through December 2. Thank you for your patience.

Simulation, hardware & system design tools

Simulation, hardware & system design tools forum

WEBENCH® Tools: webench allegro connector key problem