WEBENCH® Tools/WEBENCH-POWER-DESIGNER: WEBENCH not opening in Windows 10 Chrome

Kerry Tracey

Part Number: WEBENCH-POWER-DESIGNER
Other Parts Discussed in Thread: LMK03328

Tool/software: WEBENCH® Design Tools

The WEBENCH found at the following site all seems to work fine: http://www.ti.com/design-resources/design-tools-simulation/webench-power-designer.html. However when I search on a specific non-power part like the LMK03328.....when I click on the "Open Design" button nothing happens.

over 6 years ago

0 Amod Vaze over 6 years ago

TI__Mastermind 25280 points

Kerry,

Some of the non-power tools still use Flash so when you click on Open Design on those you may run into issues without turning on Flash. Here are some instructions from google on how to enable Flash: https://support.google.com/chrome/answer/6258784 Please let me know if you are able to access the tool once you do this.

Regards,

Amod

0 Amod Vaze over 6 years ago in reply to Amod Vaze

TI__Mastermind 25280 points

Kerry,

Please let me know if you are still running into issues.

Regards,

Amod

0 Kerry Tracey over 6 years ago in reply to Amod Vaze

Intellectual 460 points

So investigation by Collins Aerospace IT department has indicated that the "Open Design" button doesn't have a hyperlink or a link associated to it in the coding...

0 Bhushan Waghmare over 6 years ago in reply to Kerry Tracey

TI__Expert 3320 points

Hi Kerry,

I was able to open the design for LMK03328. I went ahead and created the design for you (shared below). Let me know if this helps.

webench.ti.com/.../OpenPublicSharedProject.jsp

Best Regards,

Bhushan

0 Kerry Tracey over 6 years ago in reply to Bhushan Waghmare

Intellectual 460 points

Looks like the solution is I just have to change http to https for everything I do on TI's website.

Simulation, hardware & system design tools

Simulation, hardware & system design tools forum

WEBENCH® Tools/WEBENCH-POWER-DESIGNER: WEBENCH not opening in Windows 10 Chrome