WEBENCH® Tools: Coax TINA Simulation

Jared Becker

Genius 11965 points

Tool/software: WEBENCH® Design Tools

Hi Team,

I am trying to simulate the current through a coax cable as described in this post:

http://aaronscher.com/Circuit_a_Day/coax/circuit2.html

Please see the following TINA file.

coax_cable.TSC

I have not found a way to reproduce the frequency vs current graph. Is that possible to do in TINA? If it is possible, can you please show me how?

Thank you,

Jared

over 6 years ago

0 LeonardEllis over 6 years ago

TI__Guru 71526 points

Hi Jared,

This would be a question for DesignSoft/TINA. Please use this support page: www.tina.com/technical-support/

Best regards,

~Leonard

0 Jared Becker over 6 years ago in reply to LeonardEllis

TI__Genius 11965 points

Hi Leonard,

Thanks for the insight! Has E2E stopped support for TINA related questions?

Thank,

Jared

0 LeonardEllis over 6 years ago in reply to Jared Becker

TI__Guru 71526 points

Hi Jared,

For specific TI devices, support is still provided by the respective Product Group. For general TINA support, we are referring inquiries to DesignSoft.

~Leonard

0 Jared Becker over 6 years ago in reply to LeonardEllis

TI__Genius 11965 points

Thanks Leonard!

Simulation, hardware & system design tools

Simulation, hardware & system design tools forum

WEBENCH® Tools: Coax TINA Simulation