TIDA-01093: Part number of F1 fuse in TIDA-01093

Prathamesh Patil1

Prodigy 230 points

Part Number: TIDA-01093
Other Parts Discussed in Thread: TIDA-010074

Dear All,

In TIDA-01093 please provide me part number of Fuse F1 as it is DNP but it is required in layout design.

Also it is not mention in BOM please check it.

Waiting for earliest reply,

Best regards,

Prathamesh Patil

Battrixx

over 5 years ago

0 WM5295 over 5 years ago

TI__Guru 54715 points

Hi Prathamesh,

If designing your own board use a 2 terminal fuse and/or holder suitable for your system and the access you want to provide. If you have downloaded the design files and produced a board, the properties of the component you can see it is a generic component for a leaded axial fuse and does not have a specific part number. Hole diameter is 1.7 mm and spacing is 45 mm. Select an axial leaded fuse from your preferred supplier.

0 Prathamesh Patil1 over 5 years ago in reply to WM5295

Prodigy 230 points

Dear All,

Please provide specification for fuse.

waiting for earliest reply,

Regards,

Prathamesh Patil

0 David Hien over 5 years ago in reply to Prathamesh Patil1

TI__Genius 10830 points

Hi Prathamesh,
The TIDA-010074 is using a fuse. Feel free to look at its BOM for more information about it.

0 Matt Sunna over 5 years ago in reply to Prathamesh Patil1

TI__Guru* 81034 points

Hi Prathamesh,

You will need to select a fuse appropriate for your application. Choose your fuse based on which current you would like it to blow at and the dimensions for your board. Component suppliers like Digikey allow you to search based on your specification needs and price.

Regards,

Matt

Simulation, hardware & system design tools

Simulation, hardware & system design tools forum

TIDA-01093: Part number of F1 fuse in TIDA-01093