WEBENCH® Tools/WEBENCH-POWER-DESIGNER: Importing generated schematics/PCB layout into Kicad

Amar Brar

Intellectual 520 points

Part Number: WEBENCH-POWER-DESIGNER

Tool/software: WEBENCH® Design Tools

Is there a way for TI webench schematics/pcb layout to be imported in Kicad?

over 5 years ago

0 Vishwanath Tigadi over 5 years ago

TI__Intellectual 1710 points

Hi Amar,

Currently you can export schematic and PCB only to the tools listed in Webench export tab. I'll find out if it is possible. Please hold for a day or two.

Regards,

Vishwanath

0 Vishwanath Tigadi over 5 years ago in reply to Vishwanath Tigadi

TI__Intellectual 1710 points

Hi Amar,

It turns out exporting to KIcad directly from Webench is currently not supported.

Regards,

Vishwanath

0 Amar Brar over 5 years ago in reply to Vishwanath Tigadi

Intellectual 520 points

Ok no problem

Simulation, hardware & system design tools

Simulation, hardware & system design tools forum

WEBENCH® Tools/WEBENCH-POWER-DESIGNER: Importing generated schematics/PCB layout into Kicad