WEBENCH® Tools: BQ Studio

bala krishna

Prodigy 30 points

Tool/software: WEBENCH® Design Tools

How to capture the log filesin battery management studio.

ex: if i am sending write command, i need to see the frame how the tool is loading and sending.

over 6 years ago

0 Andy Liu (BMS) over 6 years ago

TI__Guru 52115 points

I don't see that the bqSudio has a log file to serve that need.

I would suggest you take a look at the TRM of the gauge device you are interested in. Basically, it is not difficult at all to communicate with the gauge devices.

Simulation, hardware & system design tools

Simulation, hardware & system design tools forum

WEBENCH® Tools: BQ Studio