• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 37 subscribers
  • Views 335 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

WEBENCH® Tools/LM5001: the reason of exceeded current limit, and want to know the recommended solution. BOOST 11-13V -> 48V @ 0.2A

Motoyasu Hattori
Genius 9985 points
Part Number: LM5001

Tool/software: WEBENCH® Design Tools

Hi,

We run the Webench under the following condition. and output schematics.

 


However, when current is changed from 0.16A to 0.2A, the following error is happened.
Please let me know the reason?  If we want output:=0.2mA, please let me know the right part/solution.

Thanks and best regards,
M.HATTORI.

  • 0
    TI__Expert 8365 points

    Hi Motoyasu Hattori,

    LM5001 hits the current limit for the above conditions. We recommend you to follow the below steps to get the device as per your requirement.

    1. Open the Power Designer  https://webench.ti.com/power-designer/

    2. Click on Start Design for DC-DC converters.

    3. Enter the values of Inputs/Output conditions in the below text boxes and click on View Designs.

    4. The WEBENCH design solution will be listed. Click on Customize to open the design.

    Thanks & Regards,

    Praveen