EV2400b failure

PRAMOD K N

Prodigy 30 points

Other Parts Discussed in Thread: EV2400

In TP3 point there is no voltage i think it may the fault the controller

thankyou

over 5 years ago

0 Kang Kang over 5 years ago

TI__Mastermind 24870 points

Hello Pramod,

I don't understand the question.

0 PRAMOD K N over 5 years ago in reply to Kang Kang

Prodigy 30 points

In E V2400 board ,There is no 3.3 voltage in the smbus and i2c port as well as in led also and when we debugging the board in J1 port only 5v output we are getting there is 3.3 volts from the j1 to controller

0 Kang Kang over 5 years ago in reply to PRAMOD K N

TI__Mastermind 24870 points

Hello Pramod,

Seems like on-board pull-ups are damaged. Please switch to a new EV2400.

Simulation, hardware & system design tools

Simulation, hardware & system design tools forum

EV2400b failure