WEBENCH® Tools/TPS56637: Outline layer missing in the PCB design

Abdulrahman Almahrooqi

Part Number: TPS56637

Tool/software: WEBENCH® Design Tools

I downloaded the PCB design of the system for EAGLE. When I generated the gerber files of the design, the outline layer is missing. Con you help me in getting the outline layer?

The disign reference is https://webench.ti.com/power-designer/switching-regulator/export/2?noparams=0 .

over 6 years ago

0 Umayal Ramanathan over 6 years ago

TI__Expert 5920 points

Hi Abdulrahman,

We are looking into possible way of adding the outline layer.We shall soon get back to you on the same.

Thanks and Regards,

Umayal

0 Umayal Ramanathan over 6 years ago in reply to Umayal Ramanathan

TI__Expert 5920 points

Hi Abdulrahman,

In the exported file, board outline is present in Layer 49 ( Reference ) as shown in image below. Please draw the same in Layer 20 ( BRDOUT ) to get the outline in Gerber files.

Thanks and Regards,

Umayal

Simulation, hardware & system design tools

Simulation, hardware & system design tools forum

WEBENCH® Tools/TPS56637: Outline layer missing in the PCB design