• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 37 subscribers
  • Views 702 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

How to simulate design using Coaxial cable parameters in TINA

shivakant dwivedi
Intellectual 960 points
Other Parts Discussed in Thread: OPA620

Hi,

I have coaxial cable let's say RG174 in between source & input of receiver which first satge is buffer like OPA620.

Please suggest steps for simulation in Tina considering coaxial cable characteristic.