• State Resolved
  • Locked Locked
  • Replies 3 replies
  • Answers 1 answer
  • Subscribers 38 subscribers
  • Views 384 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Original question:

TIDA-00951: Software

TIDA-00951: problems with BOM components

michael coletti
Intellectual 835 points

Part Number: TIDA-00951

Hi,

my manufacture got some issues with some component in the BOM file, can someone please clarify them? it look like there are mistake in the BOM.

  • 0
    TI__Expert 6500 points

    Hi,

    thanks for interesting this TI design. reply as blow:

    • U10 is compatible with TMP300 and TMP709;
    • not sure about the heatsink,  could you cut off the PIN for assembling?
    • the U4 is LTV817S in my BoM.

  • 0 in reply to Desheng, Guo
    Intellectual 835 points

    Hi,

    Thank you for the reply, i think that you should update the bom at 00951 site.

    • U10 is compatible with TMP300 and TMP709;  - your answer is to change to TMP709?
    • not sure about the heatsink,  could you cut off the PIN for assembling? - i am not sure, i will try to fix it myself when the circuit will arrive .
    • the U4 is LTV817S in my BoM.- your answer is to change to LTV817S?

    Best Regards

    Michael

  • 0 in reply to michael coletti
    TI__Expert 6500 points

    Hi, Michael

    yes, you are correct!