DS90UB947NTRGCRQ1 IBIS MODEL

Akash Patil1

Dear Team,

My self Akash P, part of analysis team,

I was going through the simulation for one of our projects by using DS90UB947NTRGCRQ1 part as input for data signals.

What i noticed is that, all the diff data signals (D0+/- to D7+/-) signals have been assigned as output in IBIS files where as those are Input as per data sheet specifications.

Kindly have a look and confirm us back as soon as possible.

Regards,

Akash P

over 5 years ago

0 Casey McCrea over 5 years ago

TI__Guru** 103215 points

Hello Akash,

Thank you for bringing this to our attention. We will check on the simulation model for you early next week.

Best Regards,

Casey

0 Aaron Heng over 5 years ago in reply to Casey McCrea

TI__Mastermind 37790 points

Hi Akash,

Just want to inform you that this has been fixed in the model. I will share the model once I got approval from the community.

Aaron

0 Akash Patil1 over 5 years ago in reply to Aaron Heng

Intellectual 295 points

Hello Aaron,

Thanks a lot for support, also appreciate your follow back.

Request you to do the needful as early as possible, as we need to load the Gerber's for FAB house.

Warm Regards,

Akash P

0 Aaron Heng over 5 years ago in reply to Akash Patil1

TI__Mastermind 37790 points

Hi Akash,

Attached is the latest IBIS model. It will take sometimes to upload for TI.com; so, I decided to attach here for your reference.

947_IBIS_Model.zip

Let me know if you have further questions.

Aaron

0 Akash Patil1 over 5 years ago in reply to Aaron Heng

Intellectual 295 points

Hello Aaron,

Thank you very much for the support,

This issue can be closed now.

Warm Regads,

Akash P

Simulation, hardware & system design tools

Simulation, hardware & system design tools forum

DS90UB947NTRGCRQ1 IBIS MODEL