• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 38 subscribers
  • Views 568 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Original question:

[FAQ] TINA/Spice: ISO7637 profile

WEBENCH® Tools: TINA/Spice: ISO7637 & ISO16750 pulse

vinod sharma
Intellectual 450 points
Other Parts Discussed in Thread: TINA-TI

Tool/software: WEBENCH® Design Tools

Hi Nikhil,

Lib file are available from outside source but still we are not able to import it in Tina.

Can you please check LTspice model for these pulses? How can we generate same pulses in TINA.

regards

Vinod Sharma

  • 0
    TI__Mastermind 39210 points

    Hi Vinod,

    The lib file can not be used directly in TINA-TI since the primitives will not be recognized by TINA-TI. You need to run the simulation to produce the waveform in the "original tool" which supports the lib file that you have. Many tools have options to export the simulation waveform as time-value pairs. So you should do this next after simulating the pulse in your "original tool". Once this is done, the file that is produced can be imported into TINA-TI as a voltage or current source from file.