WEBENCH® Tools/TPS62827: schematic graphic is not connected

Jim Perkins

Expert 3930 points

Part Number: TPS62827

Tool/software: WEBENCH® Design Tools

When I run Webench for TPS62827 the IC is not connected to the rest of the circuit in the circuit schematic:

Please advise how to fix this?

over 5 years ago

0 Jim Perkins over 5 years ago

TI__Expert 3930 points

schematic attached

0 Shaheen Makandar over 5 years ago in reply to Jim Perkins

TI__Expert 3350 points

Hi Jim,
Thanks for reporting this issue. We had observed this and fixed it on internal servers. PFA. Updated schematic will be available on ti.com by last week of December (After next WEBENCH release).

Thanks and Regards,

Shaheen S M

0 Shaheen Makandar over 5 years ago in reply to Shaheen Makandar

TI__Expert 3350 points

Hi Jim,

Updated schematic is available on ti.com.

Thanks and Regards,

Shaheen S M

Simulation, hardware & system design tools

Simulation, hardware & system design tools forum

WEBENCH® Tools/TPS62827: schematic graphic is not connected