• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 38 subscribers
  • Views 2894 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

PSPICE-FOR-TI: error(ORCAP-15051)

Micky Shih
Prodigy 230 points
Part Number: PSPICE-FOR-TI

Hi all

I have just received received a PSice file from an external contractor. The scematic loads ok but when I try to run the file I get the following error message :

 "(ORCAP-15051) Current schematic that you are editing is not in the smulation hierarchy. Do you wish to continue?"

If I try to continue the simualtion does not run.

  • 0
    TI__Mastermind 31475 points

    Micky,

    This is because the active simulation profile is not configured to the schematic you are trying to simulate. Please right click on the correct simulation profile and make it active.

    Thanks.
    JC