Texas Instruments (TI) Simulation, hardware & system design tools support forum is an extensive online knowledge base where millions of technical questions and solutions are available 24/7. You can search through answers related to design tools & simulation, hardware kits & boards, and reference designs or ask technical support questions on everything from Webench® Power Designer to active filter design. Find the right solution for your circuit design challenges by using our TI E2E™ support forums that are supported by thousands of contributing TI experts.
If you have installed PSpice for TI on less than 3 computers, you can install on an additional machine without issue. If you are already using your license on 3 machines and need to migrate your license from an existing machine to a new one, please click…
The PSpice for TI tool requires you to sync at minimum every 30-days to ensure accuracy of the model library. Please connect to the Internet to sync the tool. If you continue to receive this message, please reach out to our online customer support team…
Your license validation about to expire. You must connect to the internet while using PSpice for TI at least once every 30 days. Please connect to the internet if you are not already online. When you launch PSpice for TI, the licenses will automatically…
Please check if you are connected to Internet. It could be that you had stayed offline for more than 30 days and the license needs to be validated. If you continue to receive this message, you may need to renew your license by logging in on TI.com. If…
Yes. PSpice for TI does need a license to run. This is installed as part of the software installation and it is validated periodically by the PSpice of TI application.
View more PSpice for TI FAQs here
You can stay offline for 30 days. A license validation is required at least once every 30 days. The license validation occurs when you launch the tool and will need an internet connection. If you are still not connected to Internet after 30 days, PSpice…
Yes. PSpice for TI will need to connect over the Internet to validate your credentials the first time you launch the tool. If you planning to go offline after installation, we strongly recommend you stay connected the first few times using the tool before…
Try to re-install the PSpice for TI tool. See if you have internet connection. If you have valid internet connection and installation fails, please click here to open a new thread on the PSpice for TI E2E forum .
View more PSpice for TI FAQs here
The error within the PSpice for TI tool means you have already used the Access Key to install on three separate machines which is the maximum. If you need to install on the new machine, please click here to open a new thread on the PSpice for TI E2E forum…
Yes. The Installer will need to connect over the internet to download the PSpice® for TI software. Please ensure you stay online through the entire duration of the installation.
View more PSpice for TI FAQs here
