CC2640R2F: how to build an Apple Find My device using ti components?

Thomas,

The Find My is a service that can be implemented on top of our Bluetooth LE stack, thus you would be able to implement it leveraging our examples and SimpleLink Academy - all this can be accessed from both the online development portal or from inside our IDE Code Composer Studio.

https://dev.ti.com/tirex/explore/node?node=AOSQDVXMohlV5LElLx5wxA__pTTHBmu__LATEST

In terms of device support, both the CC2640R2F or the next generation CC2642/2652 can support it, but without knowing more about your application I would be more comfortable in relying on the extra Flash/RAM memory of the latter devices. 

Hope this helps,

Rafael

Hi Thomas

From the CC2640R2F SDK you can use the Find Me Bluetooth Service or the Proximity Bluetooth Service. Example Proximity Bluetooth Service demo below. The Proximity Bluetooth Service normally used at Bluetooth Tags.

-kel

Thomas,

Sorry, I missed your reply.

UWB usually operates at a much wider spectrum than the ISM 2.4GHz band of BLE, therefore requiring a different radio architecture.

Regards,

Rafael