• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 51 subscribers
  • Views 339 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

CC2640R2F: Suspended Hardware breakpoint upon debugging and loading the program to hardware device

Vincent Misal
Prodigy 10 points

Part Number: CC2640R2F
Other Parts Discussed in Thread: UNIFLASH

Hi,

can some help me to deal with this issue? i can load the program to the board because it says that the my hardware breakpoint is suspended.

here is the reference image. 

thanks in advance

  • 0
    TI__Guru**** 223487 points

    Hi Vincent,

    This is a feature of the CCS Debug Configurations ->, both Program/Memory Load Options -> Connection Options as well as Auto Run and Load Options -> Run to symbol main on a program load or restart.  If you want to simply program the device without debugging you can flash the hex image with the FLASH-PROGRAMMER-2 or UNIFLASH tools.

    Regards,
    Ryan