CC2640R2L: custom board programming detailed procedure step by step

subodh satpute

Part Number: CC2640R2L

I have developed a custom ble board using CC2640R2LRHB PACKAGE and i was trying to develop program to test my board GPIOs and RF front end.

But when i am unable to understand the steps given by TI on creating custom board files.

I need help in understanding how to create files for my specific IC package.

board configuration is single ended external bias,32KHz crystal present.

over 4 years ago

0 YiKai Chen over 4 years ago

Guru 735695 points

For GPIO and peripheral testing, you can use driver examples and revise CC2640R2_LAUNCHXL.h and CC2640R2_LAUNCHXL.c according to your custom board schematics to do the test. For RF front, you can use SmartRF Studio to do the test.

0 Clément over 4 years ago

TI__Guru** 101540 points

Hi,

For the board files, you can start with existing board files (available in <SDK_INSTALL_DIR>\source\ti\boards\CC2640R2_LAUNCHXL) and use the documentation and this app note (https://www.ti.com/lit/swra640) to modify them.

Please let us know your progress.

Best regards,

Bluetooth®︎

Bluetooth forum

CC2640R2L: custom board programming detailed procedure step by step