• State
  • Locked Locked
  • Replies 0 replies
  • Subscribers 50 subscribers
  • Views 289 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Keyfob configuration for serial communication

Richard Amaral
Prodigy 115 points
Other Parts Discussed in Thread: CC2540

I'm trying to configure the CC2540 KeyFob, that comes with the Mini development kit, to use the Rx and Tx pins exposed through the TEST port. I can't seem to configure the sample firmware, simpleBLEPeripheral, to use UART0 with Port1 (P1) and Alt2. Has anyone attempted to do this? I'm limited to this configuration (UART0, P1, Alt2) due to the way the TEST port is wired. Thanks.