Bluetooth SIG RF-PHY Test Reports

Braydon Love

Hi Clement,

My BTQC has informed me that they need an actual test report to upload for the RF-PHY as part of the listing. He said that while the BT SIG does hold the test evidence that TI submitted as apart of their listing, we cannot use it.

As part of the listing process in the SIG portal, there is a window where test evidence must be uploaded. Is it possible to get this test report? If you cannot share in this forum, please advise the proper channel so I can get this.

Thanks,

Braydon

over 4 years ago

0 Clément over 4 years ago

TI__Guru** 101490 points

Hi Braydon,

Give me a few days (until next week) to evaluate with my team if we can release such documents.

Please bear with me.

Best regards,

0 Clément over 4 years ago in reply to Clément

TI__Guru** 101490 points

Hi,

I cannot share the RF-PHY test reports on a public forum.

Please contact your local sales team to get access to these documents. If needed, they can reach out to me (they will find my contact if you point them to this thread).

Best regards,

0 Braydon Love over 4 years ago in reply to Clément

Prodigy 70 points

Hi Clement,

We do not have a contact for a sales team. My colleague put in a request for someone to contact us. If you could give me contact information or have someone reach out to me it would be appreciated.

Braydon

0 Clément over 4 years ago in reply to Braydon Love

TI__Guru** 101490 points

Hi,

I will wait for this contact.

In the meantime, let me tell you again that you are the first person who asks me to get access to these reports in order to go through the certification process. Maybe you could challenge your BQC on this point.

Regards,

0 Braydon Love over 4 years ago in reply to Clément

Prodigy 70 points

Hi Clement,

I have asked my BQC about this and he referenced that something needs to be uploaded for the "Test Documentation" section shown in the screen shot below, hence why he says I need reports. Do you happen to know another way around this? He has said the qualification is no issue otherwise.

Braydon

0 Clément over 4 years ago in reply to Braydon Love

TI__Guru** 101490 points

Hy Braydon,

Are you sure the RF-PHY test results you need are the ones obtained by TI using a Launchpad? Don't you think the expected results are the one obtained with your own design?

Best regards,

Bluetooth®︎

Bluetooth forum

Bluetooth SIG RF-PHY Test Reports