CC2652R7：The XCC2652R74T0RGZ firmware for +5dBm output power

If you use SmartRF Studio to do output power test, there is no need to download firmware before you do the test. Do you use SmartRF Studio to do output power test?

Hi 

    Use - host_test_app.hex - test output power and  is for BQB

Aaron Lai    

https://e2e.ti.com/support/wireless-connectivity/bluetooth-group/bluetooth/f/bluetooth-forum/1055055/cc2652r7-the-xcc2652r74t0rgz-firmware-to-direct-test-mode-for-r-s-cmw500-bluetooth-test

https://e2e.ti.com/support/wireless-connectivity/bluetooth-group/bluetooth/f/bluetooth-forum/1058739/cc2652r7-cc2652r7-rf-max-output-power

I am not aware that Clement had ask you to create this new post. Let's wait some experts from TI to help on this.

Hi Aaron,

I've notified the BLE experts to suggest a workaround, meanwhile please be aware that the SIMPLELINK-CC13XX-CC26XX-SDK v5.40 plans to address this TX power issue and will release in January 2022.

Regards,
Ryan

Hi All,

     Any update, for the SDK

Aaron Lai

INNOCOMM