LAUNCHXL-CC26X2R1: Encryption and security

Manikanth Chintoju

Intellectual 520 points

Part Number: LAUNCHXL-CC26X2R1
Other Parts Discussed in Thread: SIMPLELINK-CC13XX-CC26XX-SDK

Hi TI,

In CC26x2R1 design what kind of encryption and security algoritms implemented and How it is implemented ?

over 4 years ago

0 Ryan Brown1 over 4 years ago

TI__Guru**** 223677 points

Hi Manikanth,

The full list is provided in Section 9.6 (Cryptography) of the datasheet, and a further explanation is given in Chapter 12 of the TRM. Several TI Driver modules are also provided in the SIMPLELINK-CC13XX-CC26XX-SDK to assist with code development.

Regards,
Ryan

0 Manikanth Chintoju over 4 years ago in reply to Ryan Brown1

Intellectual 520 points

How can I implement TLS encryption on it ?

0 Ryan Brown1 over 4 years ago in reply to Manikanth Chintoju

TI__Guru**** 223677 points

I am not familiar with this form of encryption and would assume that it is not supported by the hardware.

Regards,
Ryan

0 Manikanth Chintoju over 4 years ago in reply to Ryan Brown1

Intellectual 520 points

Can you please confirm it whether we can implement a separate encryption algorithm.

0 Ryan Brown1 over 4 years ago in reply to Manikanth Chintoju

TI__Guru**** 223677 points

I don't know enough about TLS encryption to comment on its feasibility given the available hardware resources, but if possible then you would have to implement your own custom software solution.

Regards,
Ryan

0 Manikanth Chintoju over 4 years ago in reply to Ryan Brown1

Intellectual 520 points

ok thankyou

Bluetooth®︎

Bluetooth forum

LAUNCHXL-CC26X2R1: Encryption and security