CC2651R3: Serial Interface Configuration

Rahul

Intellectual 995 points

Part Number: CC2651R3
Other Parts Discussed in Thread: CC2652R

Hi,

I am using a 5x5 CC2651R3 chipset for my custom design. I do not find a proper technical reference manual for the same.

Especially the Boot loader UART pins. Please support with all the hardware development reference manul.

Regards,

Rahul K V

over 3 years ago

+1 YiKai Chen over 3 years ago

Guru 735685 points

You can try to refer to table 8.2 in https://www.ti.com/lit/ug/swcu117i/swcu117i.pdf . I suppose CC2651R3 5x5 package should be similar to CC26x0 5x5 package.

+1 Ryan Brown1 over 3 years ago

TI__Guru**** 217877 points

Hi Rahul,

As the CC2651R3 is based from the CC2652R, please use swcu185 and "Running Software Examples on the CC13x1x3 or CC26x1x3" module from the BLE5-Stack Migration Guide. You can also refer to swra466 for bootloader guidance.

Regards,
Ryan

+1 Rahul over 3 years ago in reply to Ryan Brown1

Intellectual 995 points

Thanks for your detailed response

Bluetooth®︎

Bluetooth forum

CC2651R3: Serial Interface Configuration