• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 52 subscribers
  • Views 150 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

CC2652R7: CC2652R7 Receive Performance

lai po ming
Prodigy 70 points
Part Number: CC2652R7

Hi All,
I reference a datasheet, Receiver sensitivity at 125 kbps (LE Coded), TYP sensitivity is -104dBm, but test conditions are "Differential mode. BER = 10–3 "
that use Smart RF Studio 7 measurement result, right? I use CMW500 to measure BLE receiver sensitivity(DTM), How to do BER to PER.

Aaron Lai

INNOCOMM

  • +1
    Expert 2140 points

    This is described in the Bluetooth RF-PHY test specification section 6.3. A BER of 0.01% is the same as a PER of 30.8% for BLE packets with 37 byte payload if I remember correctly. Confirm in the specifications :-)