• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 51 subscribers
  • Views 250 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Original question:

CC2560: How to write code to a modified cc2650 sensor tag

CC2650: Sampling frequency CC2650

ABDULKARIM Miftah
Prodigy 80 points
Part Number: CC2650

Hi 

What's the heights sample frequency  can used by cc2650 sensortag ?

And How can adjust it (change sample frequency)?

  • +1
    TI__Guru**** 217787 points

    Hi ABDULKARIM,

    This is going to greatly depend on the number of sensors which need to report data and the limitations of the sensor devices themselves as defined in their respective datasheets.  You can further search through similar E2E posts to understand the considerations brought up from other instances.

    Regards,
    Ryan