• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 50 subscribers
  • Views 170 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

LP-CC2652RSIP: İnternal Bias

OOMAR
Prodigy 130 points
Part Number: LP-CC2652RSIP
Other Parts Discussed in Thread: SYSCONFIG,

Dear Team;

The SoC have internal RF balun cicuit so , it have only one RF pin (it have not RF_P and RF_N pins)

May you give some info about internal bias please?

Are there any software configuration except choosing internal bias on sysconfig file?

Best Regards.

  • +1
    TI__Guru**** 218507 points

    Hi OOMAR,

    You can find a comparison of CC13xx/CC26xx Front-End Options in Table 2-2 of SWRA640.  The only software configuration is in the RF Design section of SysConfig (affects CMD_RADIO_SETUP of ti_radio_config.c), where internal bias is already selected for LP-CC2652RSIP projects.

    Regards,
    Ryan